What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 27.06.2025 01:37
There are three different concepts here that are getting confused.
First Sentence:
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
Where did cosmic rays come from? Astrophysicists are closer to finding out - Phys.org
Now when you have a certain ac resistance, then a current flows in a loop.
One
A fuse is a non-resetable over current circuit protector.
Weed Could Be Wrecking Your Heart – Study Uncovers Dangers of Smoking and Edibles - SciTechDaily
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
nine
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
Is it possible to run away from home at 16? What are some essential items to bring for survival?
but this device (an Inductor) … impedes the rapid changes in the current.
2024–10–10[John johnson John Johnson ]
This is where the MOV conducts again, and dissipated the energy.
Inhibitory Neurons May Hold the Key to Spatial Learning and Memory - Neuroscience News
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Experts Predicts Unrecognizable Changes to Earth’s Map - The Daily Galaxy
2024–10–16 [ OO OLAOYE OYEBODE ]
These devices are installed between the “hot” and “neutral” and protective ground.
The MOV will conduct when the voltage exceeds 50% of line voltage.
An AC voltage/ current source, and an ac inductive load.
This device then solves the entire problem.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
the problem then depends on "how fast does the fuse operate?".
(Dc diagram shown, AC is similar).
What pet would you strongly not recommend?
what exactly is a ‘surge’ protector?
But… the neutral is now “floating” because of the 1 ohm resistance.
[image of Common-mode choke]
What is the American mobile phone number format?
so, what happens?
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
I dreamt my mother had died and I cried so much in my dream. What does it mean?
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
but I think this circuit , shows a few more pieces.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
[old diagram got deleted by accident]
The other is “what does a “fuse” do?”
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
Morning vs evening: What’s the best time to take blood pressure medicine? - Times of India
Because the load is inductive, the current lags the voltage.(by a bit).
eight
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
He then asserts :
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
What does a fuse do?
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Do narcissists love their children?
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
It seems Mohan does not understand the difference between a comment and an Answer.
The bolt then partially travels down the line to your home.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
2024–10–14 [Omar Gharbi Omar Gharbi ]
This one hit behind the barn.
Upvotes:
It also is a device that limits the change in current flow.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
In schematic diagrams this is the symbol for a fuse:
The third is lightning and “how it gets conducted into a home.”
This is where this question deviates from being a 'generic' question, and becomes more specific.
Here is a simplified AC power diagram.
I post the exact comment here.
One is “what exactly is in a ‘surge protector’ ? ”
There are two important concepts here.
At least they know the answer if they wanted it.
For this case there are devices called Metal oxide varistors (MOV).
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
Barnstars:
Edit 2024–10.
At one ohm, the resistor has a maximum of 1 watt power.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
These are simplified answers to the original question, and does not change anything I wrote above.
a photo is worth a thousand words.
This is 'the assistant's answer'
He then describes the function of a fuse.
What is lightning?
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
But it can get overloaded, and no longer works.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
He then describes Rainy Season and Lightning.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
A circuit breaker is similar, but is resettable.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
So, the voltage could go up to 500 volts, and the fuse will not open up.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”